HAMlab, Release 1.0
Front panel connections
Logic analyzer probes (1), Oscilloscope probes (2), Signal generator connections (3)
Turning it on and start using measuring instruments
1.) Turn on power supply, and press momentary power button on the HAMlab to turn it ON. Blue led on
power button will turn on and after 30s HAMlab will be ready to use.
2.) Make sure your computer is connected to same local area network as HAMlab.
3.) On your computer start a WEB browser (Chrome recommended).
4.) Type in the HAMlab URL.
Example:
Note: URL can be found on the back panel of the HAMlab. See image below.
8
Chapter 2. Quick start