HAMlab, Release 1.0
5. Power on Power Supply
6. Turn HAMlab ON by shortly pressing Power Button
Note: You can also use cross platform
Update HAMlab software
Instead of writing the whole SD card image, it is possible to update only the ecosystem.
Web interface update
At boot HAMlab checks for software updates, and alerts the user if a new release is available. Users can also check
for updates manually.
1. Open HAMlab desktop using your WEB browser.
2. Click on the system icon.
quickStart/system.png
3. Then click onto update icon.
44
Etcher
for burning your SD Card.
Chapter 2. Quick start