Red Pitaya HAMlab User Manual page 27

How to set direct Ethernet connection is described bellow.
First step in connecting HAMlab directly to LAN network and setting a static IP on it.
1. Use recommended connection described in Local Area Network (LAN) section. Once you are success-
fully connected to your HAMlab, open Network Manager and chose "Static" option. Input the static IP,
default getaway and DNS. Click "Apply". Fields Gateway and DNS can be left empty.
2.5. Alternative networking for HAMlab
Fig. 2.2: Figure 2: HAMlab main page user interface.
HAMlab, Release 1.0
23