Table of Contents
Advertisement
HAMlab, Release 1.0
Apart from the graph there are five areas in which the surface is divided:
1. Autoscale: Automatically sets up the Oscilloscope settings for the optimal display of the input signals. By
pressing the button the voltage axis and time axis are set so that at least one full period of the signal will fill the
screen.
2. Channels / Trigger / Measuring Tools: This menu provides controls for inputs / outputs, Trigger, guides, and
measurements.
3. Axis control panel:
• By pressing the horizontal +/- buttons the scaling of the X axis is changed and thus the selected time range
which is displayed in the graph.
• The vertical +/- buttons change the Y axis, and thus the displayed voltage range of the signal.
• In addition, the setting for the time frame, trigger, zero point of the X axis and the sampling rate are
displayed.
4. Channel Setting display: Indicates the scale of the Y axis for all channels that are switched.
5. Osciloscope application network data usage.
Features
Oscilloscope & signal generator main features are listed below:
• Run/stop and auto set functionality
• Signals position and scale controls
• Trigger controls:
– source,
48
Chapter 3. Applications and Features
Advertisement
Table of Contents
