Apart from the actual graph, there are again 5 key areas/elements, in which the surface is divided:
• Auto: Resets the zoom and brings the trigger event in the middle of the graph.
• Run / Stop: Starts recording the input signals, and interrupts it when the recording is active.
• Channels / trigger / Measuring Tools: This menu provides controls for inputs, triggers, and guides.
• Axis control panel: The horizontal +/- buttons enable you to select the scaling of the X axis and to change it,
and to select the time range displayed in the graph. The vertical +/- buttons change the Y axis, and thus the
height of the graph display. In addition, the setting for the time frame, trigger and sampling rate are displayed.
• Status Display: Displays information about the current state of the recording (stop, wait, ready).
Features
3.3. Logic Analizer
HAMlab, Release 1.0
61