Front Panel Controls And Connections - Red Pitaya HAMlab User Manual

HAMlab, Release 1.0

Front panel controls and connections

Power button
Momentarily pressing power button (1) will turn the HAMlab ON. It normally takes 30s from the button press until
the HAMlab is ready to be used. Once HAMlab is ON, holding the power button pressed will cause the proper shut
down of the device. Blue LED indication on the power button indicates that device is turned on.
Note: In case that system halts and becomes unresponsive, device can be turned off by holding power button for a
few seconds / until the blue LED is turned off.
5.6. Front panel controls and connections 97