Red Pitaya HAMlab User Manual page 35

Now you have WiFi connection established. If you restart HAMlab it will connect to selected network
automatically (if selected network is available). Also you can disconnect LAN connection and your
HAMlab will be still available over the WiFi network i.e WiFi IP address.
Note: WiFi networks are generally not robust and the full performances of the HAMlab applications can
be affected.
Access Point mode
This type of the connection is ideal if there is no LAN or WiFi network. HAMlab will simply create its own WiFi
network on which users PC/Laptop or Tablet can be connected. Access Point mode is arranged via Network Manager
application where you give the name to your HAMlab network and enable it. Since Access Point mode is enabled via
Network Manager application this means that first you need to use LAN network, access your HAMlab and arrange
the Access Point mode. After this there is no need for LAN network and after restarting the HAMlab the settings are
saved.
Note: Connecting the HAMlab via Access Point mode the additional WiFi dongle is needed. WiFi dongle is available
[Link to RS or similar].
How to create Access Point network and connect to it is describe below.
1. Start your HAMlab web user interface (Use connection described Local Area Network (LAN) connection
)
2.5. Alternative networking for HAMlab
HAMlab, Release 1.0
31