Troubleshoot - Red Pitaya HAMlab User Manual

Damaged or corrupted SD card
HAMlabs equivalent for geting your sistem back into factory setings is preparing new sd card. This should be done in
case of sd card failiure. In that situation new HAMlab OS memory card will have to be prepaired. Please folow this
steps to achieve this:
1. Power off HAMlab
2. Remove sd card from HAMlab
3. Insert sd cart into computer
4. Folow Prepare SD card
In case that written sd card does not behave as expected please use new sd card, size should be at least 4 Gb and it
should be specified as class 10.
Power SDR cannot connect to HAMlab
After clicking Power button the Power SDR application should automatically connect to HAMlab and receiving signal
should appear in the panadapter. If the following msg. appears on screen after clicking the Power button this means
that:
guide to create new sd card with HAMlab OS
6
CHAPTER

Troubleshoot

105