Network Menu - Christie APS Series User Manual

2.4 NETWORK Menu

Remember that incorrect network settings on this
projector may cause trouble on the network. Be sure
to consult with your network administrator before
connecting to an existing access point on your
network.
Select "NETWORK" from the main menu to access
to the following functions.
NOTE
• The projector does not allow both wireless and wired LAN to be
connected to the same network.
• If you do not use SNTP, then you must set the DATE AND TIME during the
initial installation. (&OPTION menu in the Operating Guide)
• The network function is not available when STANDBY MODE is set to
NETWORK-WOL or POWER SAVE and the projector is in standby mode.
Connect the projector to the network after setting STANDBY MODE to QUICK
START or NORMAL. (&SETUP menu in the Operating Guide)
• When using wireless network function, set NETWORK - WIRELESS
NETWORK to ON.
• When using a wired LAN, select which function to use, LAN or HDBaseT,
in OPTION - SERVICE - CONTROL TERMINAL - WIRED NETWORK menu.
(&OPTION menu in the Operating Guide)
LWU650-APS/LWU530-APS
User's Manual - Network Guide
2. Connection to the network
21
020-001538-01 Rev. 1 (11-2018)
LIT GUID SET APS Series NET