Connection To The Network - Christie APS Series User Manual

2. Connection to the network

2. Connection to the network
The connection method of wireless LAN and wired LAN is as follows.
Wireless LAN (121-137102-01)
Item
Standard
*1
Channel
Encryption *2
Bandwidth
*1: Available channels may vary according to area.
*2: WEP is only for INFRASTRUCTURE mode.
Wired LAN
Item
Standard
Port
NOTE
• The network function is not available when STANDBY MODE is set
to NETWORK-WOL or POWER SAVE and the projector is in standby mode.
Connect the projector to the network after setting STANDBY MODE to QUICK
START or NORMAL. (&SETUP menu in the Operating Guide)
• Depending on the type of wireless network device and computer you are
using, the projector may not be able to communicate properly with your
computer, even if the computer is equipped with a built-in wireless LAN
function. To eliminate communication problems, use a Wi-Fi
network device.
• Connect the optional wireless adapter (121-137102-01) to the WIRELESS port
of the projector when using the wireless LAN. (&12 in the Operating Guide)
LWU650-APS/LWU530-APS
User's Manual - Network Guide
IEEE802.11a/b/g/n/ac
2.4 GHz : 1~11ch
5 GHz : 36/40/44/48ch (W52)
149/153/157/161/165ch (W58)
WPA2-PSK(AES/TKIP), WPA-PSK(AES/TKIP),
WEP(64/128bit)
2.4 GHz : 20/40MHz
5 GHz : 20/40/80MHz
100BASE-TX / 10BASE-T
RJ-45
12
Description
Description
certified wireless
®
020-001538-01 Rev. 1 (11-2018)
LIT GUID SET APS Series NET