Alert Settings - Christie APS Series User Manual

3. Web Control
3.1 Projector Web Control (continued)

3.1.6 Alert Settings

Confi gures notifi cations of errors/warnings.
Refer to chapter "8.1 Email Alerts" for the details of the above errors/warnings.
When changing the settings, click the [Apply] button to refl ect the settings of the
projector.
This setting can be restored to the initial setting when clicking the [Reset] button.
Item
Alarm Time *1
SNMP Trap *2
Send Mail
Mail Subject *3
Message *4
*1 Only Filter Time Alarm.
*2 The setting item of Cold Start and Authentication Failure is SNMP Trap only.
*3 The text length can be up to 100 alphanumeric characters and symbols. Using
any Multi-byte character may shorten the text. Only symbols "!"#$%&'()*+,-
./:;<=>?@[\]^_'{|}~ and space" can be used.
*4 The text length can be up to 1024 alphanumeric characters and symbols. Using
any Multi-byte character may shorten the text. Only symbols "!"#$%&'()*+,-
./:;<=>?@[\]^_'{|}~ and space" can be used.
LWU650-APS/LWU530-APS
User's Manual - Network Guide
Confi gures the time to alert.
Click the [Enable] check box to enable SNMP Trap
alerts.
Click the [Enable] check box to enable email alerts.
Confi gures the subject line of the email to be sent.
Confi gures the message of the email to be sent.
52
Description
020-001538-01 Rev. 1 (11-2018)
LIT GUID SET APS Series NET