User's Manual - Network Guide - Christie APS Series User Manual

8.4 Command Control via the Network (continued)
6) Click the [Apply] button to save the settings.
When the authentication setting is enabled, the following settings are required.
(&59)
7) Click the [Security Settings] on the main menu.
8) Click the [Network Control] and enter the desired password.
* See NOTE.
9) Click the [Apply] button to save the settings.
NOTE
• The Password will be the same for Network Control Port1 (Port: 23),
Network Control Port2 (Port: 9715), PJLink Port (Port: 4352), My Image Port
(Port: 9716) and Messenger Port (Port: 9719).
• The new configuration settings are activated after restarting the network
connection. When the configuration settings are changed, you must restart
the network connection. You can restart the network connection from Network
Restart on the main menu. (&67)
LWU650-APS/LWU530-APS

User's Manual - Network Guide

99
8. Other Functions
020-001538-01 Rev. 1 (11-2018)
LIT GUID SET APS Series NET