User's Manual - Network Guide - Christie APS Series User Manual

3.2 Crestron e-Control
NOTE
• In any of the following cases, Crestron e-Control
- Network Settings - Other Setup - Crestron e-Control is "Disable" (&47)
- Network Settings - Common Setup - Crestron is "OFF" (&42)
- NETWORK menu - Third Party Control - CRESTRON is "OFF" (&32)
Set Crestron to on and enable Crestron e-Control
Next, restart the web browser, followed by entering the projector's IP address.
• Only English is supported on Crestron e-Control
• If the connection is terminated, the "Loading..." screen will appear. Check the
connection between the projector and the computer, then return or refresh the
Web page.
• The control from Crestron e-Control
LWU650-APS/LWU530-APS

User's Manual - Network Guide

®
(continued)
® is supported only via wired LAN.
69
3. Web Control
® cannot be used.
®
, then close the web browser.
®
.
020-001538-01 Rev. 1 (11-2018)
LIT GUID SET APS Series NET