Mitel 600 Series User Manual page 21

LED overview
The message LED indicates various events or operating statuses by
means of various colours and illumination states. You can switch the LED
on or off yourself for certain events (see "Setting the display and LED indi-
cator", page 44).
State
Lit
Flashes fast
Flashes slowly
Flashes fast
Flashes slowly
Lit
Flashes slowly
Flashes alternately The phone is switched off and is being charged in the
Mitel 600 SIP-DECT Phones
eud-1657/1.0 – R4.0 – 06.2015
Keys, display and menu guidance
Description
• Battery fully charged (if telephone is connected to the
charging unit)
• Hands-free mode activated
Incoming call
• Standby display
• Phone is inside the system's service area
• Telephone not connected to the charging unit
• Phone is outside the system's service area
• No-movement, man-down and escape alarm activated
(Mitel 632 SIP-DECT only)
• Alarm call, message
• New entries in the info area
• Alarm clock, appointment
Battery charging
• Standby display
• Phone is inside the system's service area
• Telephone not connected to the charging unit
• Battery capacity below 60%
charging unit
21