Mitel 600 Series User Manual page 51

Headset
Corded headset
Bluetooth headset
(not Mitel 612 SIP-
DECT)
Activating/deactivating Bluetooth mode:
Press the function key for
Scroll to
Scroll to
Scroll to
Subscribe new Bluetooth headset:
Press the function key for
Scroll to
Scroll to
1. Scroll to
2. Press the
it in subscribe mode.
➔
3. As soon as the search is successful, press the
Bluetooth PIN.
➔
Renaming Bluetooth headset:
Renaming Bluetooth headset: Press the
the new name.
Mitel 600 SIP-DECT Phones
eud-1657/1.0 – R4.0 – 06.2015
Description
Your phone has a headset port on the lower left side.
Headset operation is automatically activated as soon as
you plug a corded headset in.
Note: The opening of the headset connection is closed with a
captive cover on the Mitel 632 SIP-DECT. If the headset
is not in use, please close the opening so the phone can
be used in accordance with its protection class. Remove
the cover by pulling it at the top edge of the housing.
Never pull it at the bottom edge.
Your phone also has a Bluetooth interface (2.0) for oper-
ating corresponding headsets. Only audio data can be
transmitted via the Bluetooth interface with a headset.
You can subscribe a maximum of one Bluetooth head-
set.
Settings and press the
Bluetooth and press the
BT status and activate/deactivate Bluetooth with the
Settings and press the
Bluetooth and press the
Subscribe headset
New softkey. Turn on the headset which is to be subscribed and put
The phone searches for the headset automatically.
Pairing was successful.
Personalizing your phone
Menu ( ).
Ok softkey.
Ok softkey.
Menu ( ).
Ok softkey.
Ok softkey.
and press the Ok
function key >
Change
softkey.
Ok softkey and enter the
Edit softkey and enter
softkey.
51