Mitel 600 Series User Manual page 61

Managing list access
The call list and/or redial list are usually managed on your phone (setting:
Local) organised. If a list is also administered on the MiVoice Office 400
communication system (setting: PBX) then you can select which list you
want to display. If
list from the MiVoice Office 400 communication system PBX. If this list is
not available, the selection automatically remains at local.
The PBX list selection is therefore useful if you operate your cordless
phone in parallel with corded telephones. It means that all phones have
access to the same list, and changes are visible on all phones.
Setting
Redial list
Caller list
The editing options for the individual list entries (add, delete, etc.) are only
available in the local lists.
Managing list access:
Press the function key for
Scroll to
Scroll to
Scroll to the list you want and access the entries with the
Configuring device options
You can configure the following settings in the device options menu:
Setting
Silent charging
Mitel 600 SIP-DECT Phones
eud-1657/1.0 – R4.0 – 06.2015
Automatic
Description
Automatic
Local
PBX
Automatic
Local
PBX
Menu
Settings and press the
List access and press the
Description
No calls are signalled acoustically as long as the phone
is connected to the charging unit. Calls are entered in the
call list. Silent charging does not apply for charging via
the USB connection.
Personalizing your phone
is selected then the phone always takes the
( ).
Ok softkey.
Ok softkey.
Ok softkey.
61