Mitel 600 Series User Manual page 35

Transferring a call
You want to put your call partner through to someone else.
With the call transfer function you can connect your call partner with some-
one else. You can connect internal and external users with one another.
Call transfer (you are in a connection):
Press the function key for
Scroll to
Enter the second call party's phone number and confirm with the
You can also find the call number of the user you want in the phone book or in
a call list with the function key for Menu.
➔
Both call partners are immediately connected with one another.
Take (pick up own call)
You want to transfer a call from one phone to another without interrupting
the connection (for example, from a desk phone to a cordless phone).
The take function can be used to transfer calls between your phones.
Requirement: You are in the one number user concept (see "One number
user concept", page 8).
Picking up own call (you are connected to another Mitel phone:
Mitel SIP-DECT phone: Press the function key for
Scroll to
➔
After a brief moment, you will be connected to the caller on the other phone.
Activating do not disturb
You do not want to receive any calls for the time being.
With the do not disturb function, you can stop calls being made to you if
you are busy in a call or are not otherwise able to take any calls. Your
phone does not ring and is set to busy for incoming calls. You incoming
calls are automatically forwarded to a call forwarding destination config-
ured by your system administrator.
You system administrator must activate this function in the MiVoice
Office 400 communication system.
Mitel 600 SIP-DECT Phones
eud-1657/1.0 – R4.0 – 06.2015
Menu
Connect and press the
Take and press the
( ).
Ok softkey.
Ok softkey.
Phoning
Ok softkey.
Server menu ( ).
35