Mitel 600 Series User Manual page 62

Personalizing your phone
Setting
Auto. key lock
Auto answer (charger)
Auto answer
• Time
• Mode
• Microphone
• LED display
• Attention tone
Auto speed dial
Configuring device options:
Press the function key for
Scroll to
Scroll to
Scroll to the setting you want and activate/deactivate the setting with the
Change
Note: Press the
62
Description
The keyboard is locked automatically without key
presses after 10-240 seconds (PIN-protected, if acti-
vated).
The phone automatically picks up the call when you take
it from the charging unit without you having to press the
call button, for example.
(call): The phone automatically picks up a call without you hav-
ing to press a key or take it from the charging unit. Only
activate this function when your workflow requires it
since it is possible that a caller could listen in unnoticed.
For safety, automatic call acceptance is prefaced with 3
attention tones and indicated by a quickly blinking green
LED during the connection.
The function is useful if you need to be informed imme-
diately about important things (e.g. in on-call service).
You can set the following options via the
You can set the period after which automatic call accept-
ance should occur (0-20 seconds).
Note: If your phone supports the text message and/or
paging features, no value below 3 seconds should be
set.
You can set the voice connection mode here.
The call can automatically be answered with or without
the microphone switched on. The microphone can also
be switched on with the softkey after the call.
Activate/deactivate LED indications during a call.
The attention tone at the beginning of automatic call
acceptance can be activated/deactivated.
Pressing and holding a speed dial key dials this speed
dial target immediately.
Menu
Settings and press the
Device options and press the
softkey.
function key if required and select the required settings.
( ).
Ok softkey.
Ok softkey.
function key:
Mitel 600 SIP-DECT Phones
eud-1657/1.0 – R4.0 – 06.2015