Mitel 600 Series User Manual page 45

Backlight
• Conversation
• Info message
• Text message
• Job
• SOS alarm
Keypad
• Incoming call
• Appointment/alarm
clock
• Out of charger
• SOS alarm
LED display
LED
• Operational
• Incoming call
Mitel 600 SIP-DECT Phones
eud-1657/1.0 – R4.0 – 06.2015
Description
Setting for whether/how/how long the display backlight
remains on during a call connection
Light
play is not lit during a call. You can temporarily turn the
backlight on by pressing one of the three softkeys below
the display.
Setting for how long the display backlight remains on
while an info message is read
dimmed,
Setting for how long the display backlight remains on
while a text message is written
dimmed,
Setting for how long the display backlight remains on
while a job is written
seconds).
Setting for how long the display backlight remains on
upon when an SOS alarm is output
360
Sets a time during which the full keypad backlighting
remains switched on after a key is pressed.
Sets whether the keypad backlighting is switched on for
an incoming call.
Sets whether the keypad backlighting is switched on for
appointment/alarm clock
Sets whether the keypad backlighting is switched on
when the phone is removed from the charging unit.
Sets whether the keypad backlighting is switched on
when an SOS alarm is output.
Description
display: The message LED indicates various events or operating
statuses with the help of various colours and illumination
states. You can switch the LED on or off yourself for the
following events: A complete overview of the LED col-
ours can be found in "LED overview", page 21.
LED slowly flashes green or orange when the phone is in
the idle state.
LED quickly flashes green or orange for an incoming
call.
Personalizing your phone
dimmed, 10-240 seconds). With light off, the dis-
5-240 seconds).
5-240 seconds).
(No
seconds).
(Light off,
(No change, Light
(No change,
change, Light dimmed,
(Light dimmed,
Light on,
Light
5-240
30-
45