7.2
Connections of the clamping block
Connections of the clamping block
KSF plus and KSF-F plus:
The clamping block has two air connections: »I« and »III«
• Open against spring assembly, no turbo function.
The clamping block is closed mechanically via the integrated spring
assembly. A sound absorber for ventilation is built into the front
instead of connection "II". Connection "IV" has no function and
must remain closed.
KSF-LH:
The clamping force can be raised by the additional turbo function
at connections "II" and "IV".
The clamping block has four air connections: "I, II, III, IV".
• Open against spring assembly, optionally at connection "I" or
"III". Ventilation is performed via the return flow of the air
supply, optionally at connection "II" or "IV".
The clamping block is closed mechanically via the integrated spring
assembly and additional pressure support from the turbo
connection.
03.00|KSF plus, KSF-LH plus, KSF-F plus |en
Assembly
17