ALM-06-WF User's Manual
2.2 Reset to default
Press & hold the reset button on the
side over 6 Sec until the Red
bottom
LED quick flash then release to restore
default setting, default is
ALM-06-WF
set in AP mode.
Figure 2-4: Reset button locate in the bottom side of ALM-06-WF
2.3
Dimensions
The diagrams below provide the dimensions of the ALM-06-WF to use in defining
your enclosure specifications. All dimensions are in millimeters.
Figure 2-5: Dimension of the ALM-06-WF
ALM-06-WF
User's Manual (Rev1.0, Feb./2019) ------------- 11