Table of Contents
Advertisement
Mode 6:
Binary Trigger- Hold Repeat Playback
DI1 to DI5 are used as binary input, max 31 channels & DI6 in single channel.
When alarm in playback process, only highest binary channel priority can break & take place
the previous playback.
Playback will repeat when input are not release & will stop immediately when input released.
When multi trigger in same time the highest binary channel priority will take place, DI6 is the
most highest channel.
Mode 7:
Binary Trigger- Memory Once Playback
DI1 to DI5 are used as binary input, max 31 channels & DI6 in single channel.
When alarm in playback process, any trigger input will memory once for next playback.
In this mode, it only playback once, even the input is not release.
The highest binary channel priority input will take place after the previous playback complete,
DI6 is the most highest channel.
ALM-06-WF
ALM-06-WF User's Manual
Figure 3-10: ALM-06-WF Mode 6
Figure 3-11: ALM-06-WF Mode 7
User's Manual (Rev1.0, Feb./2019) ------------- 28
Advertisement
Table of Contents
