ICP DAS USA ALM-06-WF User Manual page 30

ALM-06-WF User's Manual
e. Use the function code "0x01", and set the Reference Number as "0x00", Bit
Count as "0x01" to get the Relay Output value.
f.
Figure 4-3: Relay Status reading screen
g. Use the function code "0x05", and set the Reference Number as "0x00",
value as "0xFF" to turn on the Relay Output, & 0x00 to turn off.
h.
Figure 4-4: Relay output turn On/Off
ALM-06-WF
User's Manual (Rev1.0, Feb./2019) ------------- 30