Table of Contents
Advertisement
Static IP:
IP: Specific an IP that is not been used.
Mask: Default will be 255.255.255.0.
Gateway: Basically define in the AP you are going to connect.
Service Set Identifier: Connected devices must be the same SSID, SSID
SSID
length must not exceed 31 characters.
Key of Encryption, connected devices must with the same Key.
Open
Key Type
WEP(Shared)
WPA/WPA2-PSK ：Key length must between 8~15 characters.
Wi-Fi Mode：
ALM Controller working mode (default is in AP)
AP (Access Point)：
PC or Android Device connect to ALM Controller directly through
AP(Fixed IP:192.168.77.1), AP mode support only one connection, If Multiple
devices connect at a same time, only first connected devices can access.
STA(Station):
ALM Controller will auto connect to specific Wi-Fi AP, PC or Android
Device also need to connect to the same AP, then they can use those ALM
Controller in same domain.
*. Please check specific Wi-Fi AP is active and SSID/key is same as the setting
before use.
Location information:
Set the information for you to identify & locate those Controller easily, length
must under 31 characters.
Modbus Port:
Modify Modbus TCP Port (default is 502)
ALM-06-WF User's Manual
：No Key request.
：Key length must be 15 characters.
Table 3-2: Station SSID & Key type configure
ALM-06-WF
User's Manual (Rev1.0, Feb./2019) ------------- 18
Advertisement
Table of Contents
