Table of Contents
Advertisement
Mode 4:
Binary Trigger-General Playback
DI1 to DI5 are used as binary input, max 31 channels & DI6 in single channel.
A pulse input triggered the Playback. Playback repeat when the input is not release.
When alarm in playback process, any input trigger will ignore.
The highest binary channel priority input will take place after the previous playback complete,
DI6 is the most highest channel.
Mode 5:
Binary Trigger-Trigger Input priority Playback
DI1 to DI5 are used as binary input, max 31 channels & DI6 in single channel.
When alarm in playback process, any trigger input will break & take place the previous
playback.
In this mode, it only playback once, even the input is not release.
The
priority depend on trigger input, only when multi trigger in same time the highest binary
channel priority will take place, DI6 is the most highest channel.
.
ALM-06-WF User's Manual
Figure 3-8: ALM-06-WF Mode 4
Figure 3-9: ALM-06-WF Mode 5
ALM-06-WF
User's Manual (Rev1.0, Feb./2019) ------------- 27
Advertisement
Table of Contents
