Alarm Mode & Audio Editor - ICP DAS USA ALM-06-WF User Manual

3.3 Alarm Mode & Audio Editor
ALM-06-WF contain 8 kinds of alarm mode, Mode 0 ~ 3 are DI1~DI6 in single
independence channel trigger, in DIx channel priority, the priority of DI channel is
DI6 > DI5... > DI1.
Mode 4 ~ 7 are DI1~DI5 in Binary trigger & DI6 in single channel trigger, the
priority of DI channel in this mode is DI6 > 11111b(0x1F)>...> 00001b(0x01).
Mode Channel Trigger Function
0
1
Trigger Input
2 Hold Repeat Playback
3 Memory Once Playback
Max 4 MP3 files can be add for each Channel or Binary trigger alarm, it will
playback from #1 to #4 for the trigger depend on the setting.
Relay output can set an extend alarm output to trigger other device.
All those setting can be done in PC Utility & can be monitor Armed/DisArmed
on both PC Utility or Android APP, show as below.
Figure 3-3: ALM-06-WF PC Utility Audio Editor page.
ALM-06-WF User's Manual
General Playback
priority
Playback
ALM-06-WF
User's Manual (Rev1.0, Feb./2019) ------------- 20
Alarm Mode
Mode
4
5 Trigger Input priority Playback
6
7
Binary Trigger Function
General Playback
Hold Repeat Playback
Memory Once Playback