Table of Contents
Advertisement
kBox manual v 8
Maintenance of screws
exxentric.com/support
KBOX MAINTENANCE (cont.)
Maintenance of screws and nuts
The kBox center parts (shaft, bearings and flanges) are
subjected to heavy and repeated forces. To keep
everything working smoothly we have included a small
toolkit for these key parts. Toolkit consists of two hexkeys (3
and 5 mm) and two fixed wrenches. Use those to regularly*
tighten the screws and nuts underlined below. Tools for
those not underlined are included for your convenience in
case of small repairs needed.
Toolkit:
3 mm hexkey - f langes , s haft position screws and belt bite
5 mm hexkey - for belt bite screw and auto-retract
casing**
10 mm wrench - for belt bite nut
13 mm wrench - f or ball bearing nuts
VIDEO:
h
ttps://youtu.be/7pkqJAuGQeM
*) Once a month in professional settings (gyms, teams,
clinics) and every third month for home users.
**) Auto-retract casing not to be opened if not damaged
or not working and after contact with Exxentric personnel
and receiving instructions.
lever
19
Advertisement
Table of Contents
Need help?
Do you have a question about the kBox4 Pro and is the answer not in the manual?