Heat Sink - HP Stream PC 14-ax1 Series Maintenance And Service Manual

Heat sink

Description
Heat sink
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the heat sink:
1. Remove the two Phillips broad head PM2.0×2.0 screws (1) that secure the heat sink to the system
board.
2. Lift the heat sink off the system board (2).
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system
board each time the heat sink is removed. Thermal material is used on the processor (1) and the heat sink
section (2) that services it.
30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page 24).
Spare part number
907105-001
Battery on page 25).