Bottom Cover - HP Stream PC 14-ax1 Series Maintenance And Service Manual

Bottom cover

Description
Bottom cover for use in blue models
Bottom cover for use in white models
Bottom cover for use in black models
Bottom cover for use in gray models
Bottom cover for use in pink models
Bottom cover for use in purple models
Before removing the bottom cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the bottom cover:
1. Position the computer upside down.
2. Peel the two rubber strips off the bottom cover (1) to gain access to the screws underneath.
3. Remove eight Phillips PM2.5×6.0 screws (2) that secure the bottom cover to the computer.
4. Pry around the edges to disengage the bottom cover from the computer (3).
5. Lift the bottom cover from the computer (4).
Reverse this procedure to install the bottom cover.
24 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Spare part number
911362-001
911364-001
928417-001
933581-001
L16701-001
L16706-001