System Board - HP Stream PC 14-ax1 Series Maintenance And Service Manual

System board

Description
Intel Celeron N4000 processor, 2 GB system memory, 32 GB eMMC hard drive, and a non-Windows
operating system
Intel Celeron N4000 processor, 2 GB system memory, 32 GB eMMC hard drive, and the Windows 10
operating system
Intel Celeron N4000 processor, 32 GB eMMC hard drive, and a non-Windows operating system
Intel Celeron N4000 processor, 32 GB eMMC hard drive, and the Windows 10 operating system
Intel Celeron N4000 processor, 64 GB eMMC hard drive, and a non-Windows operating system
Intel Celeron N4000 processor, 64 GB eMMC hard drive, and the Windows 10 operating system
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the WLAN module (see
6. Remove the heat sink (see
Remove the system board:
1. Disconnect the following cables from the system board:
(1): Power button board cable
(2): Display cable
(3): Power connector cable
(4): Keyboard cable
(5): Battery cable
(6): TouchPad cable
(7): RTC battery cable
Bottom cover on page
WLAN module on page
Heat sink on page 30).
24).
27).
Component replacement procedures
Spare part number
L16633-001
L16633-601
L16634-001
L16634-601
L16637-001
L16637-601
33