Touchpad - HP Stream PC 14-ax1 Series Maintenance And Service Manual

TouchPad

Description
TouchPad for use in blue models
TouchPad for use in white models
TouchPad for use in black models
TouchPad for use in gray models
TouchPad for use in pink models
TouchPad for use in purple models
TouchPad cable
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
6. Remove the system board (see
Remove the TouchPad:
1. Remove the three Phillips PM2.0×3.0 screws (1) that secure the TouchPad bracket to the computer, and
the lift the bracket from the computer (2).
2. Disconnect the cable from the TouchPad (3).
Bottom cover on page 24).
System board on page 33).
Spare part number
905691-001
910178-001
928421-001
933606-001
L16703-001
L16708-001
905563-001
Battery on page 25).
Component replacement procedures 35