HP Stream PC 14-ax1 Series Maintenance And Service Manual page 65

● Set a location for storing the test results. You can also set the user name and password settings used for
uploads.
● Display status information about the diagnostics run previously.
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Main, and then Save Changes and Exit to save your settings.
Your changes take effect when the computer restarts.
Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
f10 to enter Computer Setup.
57