Version And Production Information - Kensence S-MIX-PRO1600 Operation Manual

2. Switch the first input signal to the 1-5 port output and send the command: 1X1-5.take.
3. Switch the first input signal to the 3rd, 8th, and 15th port output, and send the command: 1X3, 8,
15.take.
4. Switch the 4th, 5th, and 6th input signals to the 21st, 25th, and 33rd port outputs, and send the
command: 4X21.5X25.6X33.take.
5. Switch all the inputs and outputs one by one (1 cut 1, 2 cut 2, 3 cut 3 and so on to 40 cut 40) Send
command: NXN.Take.
6, save the current state command: save[Y].
Example: To save the current status to the seventh storage unit, enter "save7."
7. Call the stored unit instruction: recall [Y].
Example: To call the status of the 7th memory location and set the input/output status, enter "recall7.".
8, buzzer opening and closing:
Example: Buzzer on. Turning the buzzer on, you can hear beeps when switching
Buzzer off. Turn off the buzzer and you won't hear a beep when switching

8.Version and production information

Release Notes (document number:)
Date Version
Number
2018-3 V1.01.01
22
Description
First version
S-MIX-PRO1600