Ip Setting - RD RDC6445GZ User Manual

Shenzhen Reader Technology Co., Ltd
When modifying the first parameter, press the <Enter> key to enter the modification
mode ("blue selection block" right side becomes
modify, and then press the <Enter> key to exit the modification mode. Press the
direction key to select other parameters and press the number key to modify the
parameters. After the modification, move the "selection block" to the "Write " entry
and press the <Enter> key. The parameter setting takes effect. Press the <Esc> key
to return to the previous menu.

8.6.4 IP Setting

Select the "IP setting" entry under the controller setting interface, press the <Enter>
button, and then pop up the interface as follows:
Press the direction key to select a parameter, then press the number key to modify
the parameter. After the modification, move the "selection block" to the "Write" entry
and press the <Enter> key. The parameter setting takes effect. Press the <Esc> key
to return to the menu at the previous menu.
Enable speed shift:
12345.678
Fast moving:
12345.678
Slow moving:
Press <Enter> or Num key.
Figure 8.6.3
IP address : 192 168
.
Press <Enter> or Num key.
Figure 8.6.4
36
Yes
mm/s
mm/s
Read
Write
), press the "Up/Down" key to
1 100
. .
Read
Write