Laser Power Infomation - RD RDC6445GZ User Manual

Shenzhen Reader Technology Co., Ltd

8.7.6 Laser power infomation

Note: laser power information function is effectively configured on PC software.
Select the "Laser power info" entry under the funtions interface, press the <Enter>
button, and then pop up the interface as follows:
When the "blue selection block" stops at the items 1, 2, 3 and 4 of the laser power
supply, press the <Enter> key to view the information of each power supply. The
interface is as follows:
When the "blue selection block" stops at the "diagnostic TL" and "diagnostic TH"
entries, press the <Enter> key to check whether the IO of the laser power supply is
abnormal, and if so, an alarm will be generated.
Press the <Esc> key to return to the previous menu.
Laser power 1
Laser power 2
Laser power 3
Laser power 4
Diagnose TL
Diagnose TH
Figure 8.7.6-1
Laser power 1
Voltage: 000.0
Current: 000.0
Control: 000.00
Temperature: 000.00
Status: TL=0|TH=0
Water protection
Power failure
Laser tube failure
Figure 8.7.6-2
41
KV
mA
V
Open circuit fault
Overvoltage fault