Diagnose - RD RDC6445GZ User Manual

Shenzhen Reader Technology Co., Ltd
The operation method is the same as manual setting.
When "Continue" item is selected, then the "Laser time" item is not valid, on that time,
push the Laser key to splash the enabled lasers, and when Laser key is loosed, then
the lasers will finish splashing. When the Laser mode item is "Manual", then pushing
the Laser key one time, the enabled lasers will splash a fixed time.

8.7.5 Diagnose

Select the "Diagnose" entry under the funtions interface, press the <Enter> button,
and then pop up the interface as follows:
The interface displays the hardware IO information of the system, and reads the
hardware information of the system by pressing the <Enter> key. When the hardware
signal is triggered, the small box on the left side of the corresponding entry will show
red. Otherwise, it will show gray. Press the <Esc> key to return to the previous menu.
Laser mode: Continue
Laser time: 12
Press <Enter> or Num key
Figure 8.7.4
X Limit+
X Limit-
Y Limit+
Y Limit-
Water1
Protection
Read
Figure 8.7.5
40
ms
Read
Write
Z Limit+
Z Limit-
U Limit+
U Limit-
Water2