File Management; Memory File - RD RDC6445GZ User Manual

Shenzhen Reader Technology Co., Ltd

8.8 File Management

8.8.1 Memory File

Push the <Menu> key when the screen is on the main interface, it will show as below:
File:
01:DEFAULT 65535
02:DEFAULT 65535
03:DEFAULT 65535
04:DEFAULT 65535
05:DEFAULT 65535
06:DEFAULT 65535
07:DEFAULT 65535
08:DEFAULT 65535
U disk+
Count:
When showing this menu, the system would read the memory file firstly, the file name
and the work times would be listed in the area, and the selected file is previewed in
the bottom right area. <Up >/<Down> keys could be used to move the cursor on the
file name list. When the cursor is on a target file name, presses the <Enter> key,
the selected file will be previewed on the main interface, and then if <Esc> key is
pushed, the preview will disappear.
<Left>/<Right> keys could be used to move the cursor left and right.
Press the <Esc> key to return to the previous menu.
The items on the right and bottom are as follows:

Run: To run the selected file;

Track: To track the selected file, and the track mode is optional;

Work time: To forecast the running time of the selected file, and the time is
accurate to 1ms;

Clear count: To clear the running times of the selected file;

Copy to U disk: To copy the selected file to U disk;

Delete: To delete the selected file in the memory;

U disk: read the U disk file list;

Memery operation: the other operation of the memory files;
Count:
Run
Frame
Work time
Clear count
Copy to U disk
Delete
Mem oper+
888 Idle
Figure 8.8.1
File:
Speed:
Max power:
Normal
0
200mm/s 85.5%
1
0
200mm/s 85.5%
2
0
200mm/s 85.5%
3
Read file
0
200mm/s 85.5%
4
00:00:00
42
TempFile
100mm/s
85.5%/85.5%
X: 10000.0mm
Y: 10000.0mm
Z: 10000.0mm