Prompt And Alarm Information - RD RDC6445GZ User Manual

Shenzhen Reader Technology Co., Ltd
At this point, you can enter the password directly by pressing the number key, or you
can press the <Shift> key to use the keypad, press the direction key to select a
number or letter, press the <Enter> key to select, and then press the <Shift> key to
return to the password selection. If the password is entered correctly, the new
password will become effective, otherwise the "password error" will be displayed.
Press the <Esc> key to return to the previous menu.

8.10 Prompt and alarm information

In the process of user operation or system operation will pop up some hints and alarm
information, such as reset, water protection failure, hard limit protection, border
crossing and so on.

Prompt
The system pop-up "The system is resetting.". show as below:
The user operates according to the interface prompts.

Alarm Information
The system generates "water protection fault", show as below:
123456
Old passwrod:
987654
New password:
987654
Confirm password:
Password error
1 2 3 4 5
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Press <Shift> key to select password.
Figure 8.9.2
The system is resetting.
RDC-V15.01.00
HMI-V10.00.00
To cancel reset, press the
<Esc> key
Figure 8.10-1
46
6 7 8 9 0