Menu Key; Speed Setting - RD RDC5121 Manual

 Num: To accumulate the work number of the current file
 MaxPower: To display the max power
 Spend: To display the speed of work
 Idle: o display the current status of the machine, such as Idle, Run, Pause, Finish, etc.;
When work is Idle or finished, all keys can be pushed, users can select a file to run, set some
parameters, preview to a select file etc. But, when work is running or paused, some keys don't respond
when they are pushed.

4.2.2 Menu Key

The Fn key can be pressed when the system is idle or the work is finished. On pressing this key, it will
show some entries in the following interface:
Push "Y+/-" keys to move the green block to the anticipant item, and then push the "Enter" key to
display the sub menu.

4.2.3 Speed Setting

When selecting the "speed" entry under the menu interface, the following dialog box is displayed:
Push the "X+/-" Keys to move the cursor in the numeral area, and push the "Y+/-" keys to change the
SHENZHEN RUIDA TECHNOLOGY
RDC5121 Control System Manual
Figure 4.2
Figure 4.3
14