Overview; Briefing; Description Of Controller Model; Comparison Of Controller Performance - RD RDC6445GZ User Manual

Shenzhen Reader Technology Co., Ltd

1.1 Briefing

RDC6445GZ system is a new generation system for control of laser engraving and
cutting, which is developed by RD Co., Ltd. In addition to high hardware stability, high
voltage or static electricity rejection, and friendly 5'' TFT man-machine display. This
system is provided with stronger software function including perfect 4-axle motion control
function, large-capacity file storage, two-channel adjustable digits laser power control
interface, USB driver of stronger compatibility, multi-channel general/special IO control,
and, this system can communicate with PC by USB2.0 or Ethernet, and the
communication mode is automatically checked by the system.

1.2 Description of Controller Model

RDC6445GZ

1.3 Comparison of Controller Performance

Power
Feature
Laser Port
Feature
Copying
USB

1. Overview

RDLC420 RDC6332G
One-way 5V, Only one-way 24V
one-way 24V, (compatible with 36V
independent for power supply, but
not recommended)
One-way digit Two-way digits and
and one-way two-way analog port,
analog settable
independently
non-interacted
Common Quick
Panel shape
Conventional Edition
854*480-TFT
4-axle Card
Hardware Sub-Edition
Hardware Edition
Laser Control
RD Technical Products
RDC6342G
Only one-way 24V
(compatible with 36V
for power supply, but
not recommended)
Two-way digits and
two-way analog port,
settable
and independently
non-interacted
Quick
1
RDC6445GZ
Only one-way
(compatible with 36V for
power supply, but not
recommended)
Two-way digits port,
settable independently
and non-interacted
and
Very Quick
24V