Additional Leakage Water Sensors In The Power Units (Option W26); Interfaces; Hydraulic Interfaces; Electrical Interfaces - Siemens SINAMICS SM120 Operating Instructions & Installation Instructions

3.5.16

Additional leakage water sensors in the power units (option W26)

Additional leakage water sensors are installed in the power units.
3.6

Interfaces

3.6.1

Hydraulic interfaces

The cooling circuit dissipates the semiconductor losses. The water flows into the cooling circuit
through the inlet pipe. The water is heated by the waste in the semiconductors. The water
flows out through the return pipe.
See also
Connecting the water circuits (Page 70)
3.6.2

Electrical interfaces

Auxiliary supply and signals
15-pin interfaces for the auxiliary power supply and signals are available at the input and output.
Image 3-5
SINAMICS SM120 6SL38855?B
Operating Instructions 12/2015
Auxiliary supply and signal interfaces
Description
3.6 Interfaces
47