Cisco SPA 525g User Manual page 31

Small business

Hide thumbs Also See for SPA 525g:

Table of Contents

Setting the Phone Wireless Connection

To set up the Cisco SPA525G and Cisco SPA525G2 wireless connection:

STEP 1

If you have plugged in an Ethernet cable to connect the phone to the wired network,

remove it and reboot the phone. When the phone is connected by using wired Ethernet, the

phone Wi-Fi connection is disabled.

STEP 2

Press Setup.

STEP 3

Scroll to Network Configuration and press Select.

STEP 4

Highlight Wi-Fi, press the Left or Right Arrow key to toggle Wi-Fi on or off.

STEP 5

Press Set.

STEP 6

Scroll to Wi-Fi Configuration and press the Right Arrow key.

STEP 7

Choose one of the following options:

•

Wireless Profile—Use this option to add a new wireless profile (either manually or by scanning

for available networks), editing an existing wireless profile, or connecting to a previously

configured network. See

•

Wi-Fi Protected Setup—If your wireless router supports Wi-Fi Protected Setup, use this

method to set up your wireless connection. See

Manually Adding a Wireless

Using Wi-Fi Protected

Profile.

Setup.

Table of Contents

Small business spa525g2