Using Basic Phone Functions
This chapter describes how to use the basic functions of your Cisco SPA525G and Cisco
SPA525G2 IP phone.
Placing or Answering a Call
You might have to dial a number or numbers to reach an outside line. Ask your system administrator.
Depending on the phone system setup, you might be able to place or answer calls by using various
methods.
To place or answer a call:
•
Pick up the handset.
•
Press the Speaker button.
•
Press the Headset button.
•
Press a green line button (to place a call) or a red flashing line button or the Answer softkey (to
answer a call).
If you are on a call and another call comes in, choose one of the following options:
•
Press the Answer softkey. (Press the Ignore softkey to ignore the incoming call.)
•
Press the flashing red line button.
The call in progress is put on hold and the incoming call is answered.
To return to the first call, press the flashing red line button, or select the call on the screen using the
Up Arrow or Down Arrow key and press the Resume softkey.
42