Cisco SPA 525g User Manual page 17

Using Wired and Wireless Headsets
The SPA IP phones support headsets from different manufacturers. For the latest supported models,
contact your reseller. Additional information can be found at the manufacturer websites.
Connecting the Headset
Each brand and type of headset may require different steps for connection. Consult the
documentation for your particular headset for more information:
• Bluetooth headsets—See the
• Wireless (non-Bluetooth) headsets (such as Plantronics or Jabra)—Follow the instructions for
your product to connect the phone to the wireless headset base.
• Wired headsets—Connect the 2.5mm connector from the headset into the headset port on the
right side of the IP phone.
• Electronic Hookswitch (EHS)—Some headsets enable you to answer and end phone calls by
using controls located on the headset. The SPA525G2 supports the following EHS capable
Plantronics headsets:
• Savi W7xx series ( Savi W710, W720, W730, W740 and W745)
• CS5xx series ( CS540, CS510 and CS520)
"Connecting Bluetooth Headsets" section.
22