Configuring Date And Time Parameters On Your Phone; Setting Your Phone's Date And Time; Using Star Codes - Cisco 501G User Manual

Using Advanced Phone Features

Configuring Date and Time Parameters on Your Phone

Configuring Date and Time Parameters on Your Phone
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6

Using Star Codes

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Setting Your Phone's Date and Time

The date and time for your phone normally come from the SIP proxy server or NTP
server. However, if you need to change some date and time parameters, you can
follow these steps:
Press the S S etup button.
Select T T ime/Date.
Enter the date in the following format: mm*dd*yy (this will display as m/d).
Enter the time in the following format: hh*mm*ss (this will display as (h:mm).
If the time does not display am (a) or pm (p) correctly, adjust with Offset. To change
from a.m. to p.m., enter *12*00*00, to change from p.m. to a.m., enter #12*00*00.
Press s s ave.
You can set just one of these choices, if necessary.
Your IP phone can support numerous "star codes" to access phone
supplementary services. These codes, which start with *, are entered before
dialing a telephone number and provide services. For example, to block caller ID
(star code 67), you would dial *67, followed by the telephone number you are
calling.
Following is a list of commonly-used star codes. Some star codes may not be
available to you; consult your system administrator for more information.
4
60