Using Basic Phone Functions; Using The Speakerphone; Using The Headset With Your Ip Phone; Switching Between The Handset/Headset/Speakerphone - Cisco SPA504 User Manual

For customers in AL, FL, GA, KS, SC, TN

Using Basic Phone Functions

Using the Speakerphone

To use the speakerphone, press the Speaker button (the handset can be either on or off hook).

Using the Headset with Your IP Phone

NOTE: Steps to use your headset with the IP phone may vary. Consult the User documentation for your
headset for more information.
To use a wired headset, press the Headset button on your phone and dial the number to place a call, or
press the headset button to answer a ringing call.

Switching Between the Handset/Headset/Speakerphone

During a Call
Any of these audio devices (handset/headset/speakerphone) can be used during a call. However, only one
device at a time may be used.
The handset can be on the hook when using the speakerphone or headset function. If switching from the
handset to the speakerphone, make sure the speakerphone or headset light is illuminated before placing
the handset back on the hook (if you are switching from the handset to a wireless headset, however, do
not replace the handset or you will disconnect the call).
Sending Audio to the Phone Speaker
Choose this option to send audio to the speaker when the handset is lifted.
1. Press the Setup button.
2. Select Preferences.
3. Choose Send Audio to Speaker > edit.
4. Press y/n to enable or disable the feature.
5. Press ok.
6. Press save.
MGCP.U.1304.O
9