The Ja-60 Keypad(S) - jablotron JA-63 PROFI Installation Manual

6 The JA-60 keypad(s)

system via a connected PC with ComLink software. The PC can be connected locally with or remotely, using a JA-60U
modem (see section 17 and 18).
JA-63 „PROFI" Alarm System
Fig. 1 – Wiring examples
The system can be programmed and operated by JA-
60E keypad(s). As a maximum, 4 keypads can be wired
to the control panel. The keypads can either be wired by
cables equipped with modular jacks or by standard
cables to terminals 1234. The same numbered terminals
(pins in the connectors) must be linked together. It is
possible to combine arbitrary wiring with modular
connectors and ordinary cables - see diagram. Modular
jack cable should not be used for a distance longer than
10 meters.
The JA-60E keypad can also be connected remotely
via the JA-60U modem.
When a control panel has a „R" radio module, it can
also be operated and programmed via a JA-60F
wireless keypad(s). The wireless system can also be
operated by remote controls RC-11, RC-22 & RC-60,
as well as by a JA-60D wireless keypad. The control
panel can have up to 8 wireless controllers.
It is also possible to operate and program the JA-63
- 7 - MGK51404