sauter FP Series Instruction Manual page 11

6) Storage interface
1. Peak: max. value during testing
2. Time: total time during testing, unit: seconds
3. Upper and lower limit/sectional area、 pressure.
If material pressure parameter is "Yes", sectional area and intensity are displayed;
See picture 11
If material pressure parameter is "No", upper and lower limit are displayed; see
Picture 12.
4. Save grid: If the front color becomes white, it indicates that the tested curve is
saved. If the front color doesn't become white, it indicates that no tested curve is
saved. means the current saved grid
5. Unit button: Press this button to convert four units (N, Kgf, lbf, ozf)
6. Save button: this button has to be pressed to save the current test curve into the
save grid; the sign
7. Exit button: this button has to be pressed to get back to work interface
8. Detail button: Press this button and you will get to interface to view the curve de -
tails (picture 13)
FP-BA-e-1610
points at and make
Curve detail interface:
to switch to next grid.
11