sauter FP Series Instruction Manual page 18

The configured print form editor in this software can go on simple type setting and
amending display details. As a general rule, the user can only amend the descriptive
content in the test report.
(7) Associate files: associate rmd type data base file.
(8) Exit system: exit system
2) Set menu: Set menu includes the following commends:
(1) Graph setting: set the form property in draw pointing region (pic. 26)
Graph setting includes graph color setting and test curve thickness setting.
For the software defaults the form property; the user can choose or amend in corre-
sponding form immediately by pressing "confirm" button with the need to change.
Press the "default value" button to recover the initial status.
(2) Test frequency setting: set the speed rate between software and sensor (pic. 27)
For supporting USB different version agreement, the software can set the speed rate
with the sensor. As a general rule, the user should better set 100ms frequency to get
best connected with speed rate and curve purpose.
3) Test menu: Test menu can be continued under connected status. After new grap h-
ic mode, the other test menu can be continued. They constraint each other. Test
menu includes the following commends:
(1) New test set: new graph set mode (pic. 28)
New test set contains test title, test batch, description, current graph mode etc.
The software provides three graph modes: value/time, value/shift and pressure/time.
Speed units contain inch/s, mm/s, cm/s, m/s.
Sectional area units contain square millimeter, square centimeter, square meter.
18 FP-BA-e-1610