Accessing the CLI
By default, the hub automatically configures the baud rate of its
console port to operate with the connected management station or
terminal, provided the parity, stop bits and character size are identical
to the connected management station or terminal. You may need to
perform the wake-up procedure to initiate the communication. To do
this, press [Return] several times at the management station or
The login sequence for the CLI begins as soon as the hub detects a
connection to its console port, or as soon as a Telnet session is started.
The login prompt
As the initial user, enter the default user name
[Return] at the
prompt. The first time you access the CLI,
the password is null.
We recommend that when you have accessed the stack, you change
the default passwords for the user levels (if you have not already done
so) by logging in as the different user levels.
At subsequent logins, enter your user name. If the user name is valid,
prompt appears. You must enter your password
correctly before you can continue with your management session.
If you have logged on correctly, the initial menu appears. If you have
not logged on correctly, the message
and the login sequence starts again.